Datamax H Class Operator's Manual page 86

Area /
Item)
Peel/Tear Using a cotton swab
Bar dampened with solvent*,
remove all adhesive build-
up on the tear edge, and
using a soft-bristle brush
remove all paper debris on
the component.
Media Using compressed air or a
Sensor soft-bristled brush,wipe the
sensor clean.
Exterior Using a lint free cloth and
Surfaces mild detergent or desktop
cleaner, wipe the covers
clean.
Interior Using compressed air or a
Surfaces soft-bristled brush, remove
all debris build-up inside
the printer.
* It is recommended that a solvent containing isopropyl alcohol be used.
Method
As needed
Monthly
As needed
As needed.
Interval
78