Datamax H Class Operator's Manual page 68

APPLICATION
VERSION
BOOT LOADER
UPGRADE
PRINTER CODE
UNLOCK
FEATURE
Note: This information is also provided on the Configuration Label.
SET FACTORY Returns the current printer settings to the factory-programmed values
DEFAULTS (except CUSTOM ADJUSTMENTS and calibrations) or, if selected, to the
Factory Setting File, where selecting YES at the prompt causes the
configuration to be restored.
FORMAT
ATTRIBUTES
TRANSPARENT
XOR
OPAQUE
LABEL Allows the label format to be rotated 180 degrees before printing, where:
ROTATION
ENABLED Flips the formats.
DISABLED No format flipping occurs. (Default Setting)
Displays the version level, version number, and date of the application
firmware.
Displays the version level and date of the boot loader.
Upgrades the software feature level of the printer. (An authorization code
is required -- use the UP and DOWN Buttons to enter the alphanumeric
authorization code, use the LEFT and RIGHT Buttons to position the
cursor, and the ENTER Key to enter the number).
Unlocks additional optional features within the printer. (An authorization
code is required -- use the UP and DOWN Buttons to enter the
alphanumeric unlock code, use the LEFT and RIGHT Buttons to position
the cursor, and the ENTER Key to enter the number).
Defines the manner in which overlapping text and graphics appear on the
label, where:
Intersecting text, images, and bar codes will be printed, for
example:
Intersecting text, images, and bar codes will not be printed, for example:
(Default Setting)
Intersecting text, images, and bar codes will be printed by obliterating
those formatted first, for example:
60