Datamax H Class Operator's Manual page 64

The menu selections are defined as follows:
DISPLAYED ITEM DESCRIPTION
ITEM
MENU MODE Selects which menu level is accessed when entering the menu system,
where:
User Menu Accesses the limited function menu that contains basic controls. (Default
Setting)
Advanced Accesses the full function menu that contains all controls, settings, and
Menu diagnostics.
Controls the creation, storage, and recall of printer configuration files,
CONFIGURATI
ON FILE where:
RESTORE Provides a list of available configuration files. Selecting a file causes a
CURRENT * printer to reset and then re-configure according to the activated file.
SAVE Creates a file based on the printer's current configuration, as described
SETTING AS here.
DELETE FILE Provides a list of available configuration files for deletion. After confirmation,
* a file selected for deletion will be removed from memory. (Note that a
currently activated file cannot be deleted.)
DISABLED * Disables the option.
FACTORY Provides a list of available configuration files, where NONE is the default
SETTING value. The configuration information held in the selected file will be used to
FILE * restore the printer's database following the execution of a Level One Reset,
or by selecting YES when prompted in the SET FACTORY DEFAULTS
menu item.
INTERNAL Sets the number of 1KB blocks allocated (of the 100 - 5120 KBytes of
MODULE memory available) for the internal DRAM 'D' module, where:
1088 KBytes Is the Default Setting.
DEFAULT Designates the memory module that will be used for file storage when no
MODULE other module destination has been specified, where:
D Is the Default Setting (DRAM module).
G Flash module.
SCALEABLE Configures the number of 1KB blocks allocated (of the 100 - 5120 KBytes of
FONT CACHE memory available) for the scaleable font engine, where:
0511 KBytes Is the Default Setting.
Note: The available memory may vary depending upon printer model and options.
56