Datamax H Class Operator's Manual page 79

OPTION
FEEDBACK
DISABLED
SCANNER
RFID HEX
RFID ASCII
PROCESS SOH
(DATA)
ENABLED
DISABLED
Allows feedback characters from an optional device to be returned to the
host device, in the format of: <A;B;C;D;E;F>[CR]
Where:
A
Is the device type: R = RFID; and, S = Linear Scanner
-
B Is the resulting status: C = entire label complete; F = faulted
- (failed) label; and, U = unknown
C Is the number of expected reads for bar codes or tags, given in
- two characters.
D Is the number of good reads for bar codes or tags, given in two
- characters.
E Is the printer's internal Job and Sub Job Identifier, given in four
- characters each.
F Is the data that was read, delimited with semicolons (;) on
- multiple reads.
Normal printer operating mode; no data is reported. (Default Setting)
Linear Scanner information is reported.
RFID information is reported in hexadecimal format.
RFID information is reported in an ASCII format.
Determines the way the printer responds to an Immediate Command
(e.g., Get Status, Request Memory Module Storage Information, etc.).
Upon receipt, operations are interrupted to process that command.
Normal printer operating mode. (Default Setting)
71