Datamax H Class Operator's Manual page 110

Displayed Message
ERROR WRITING
FLASH
HARDWARE
MISMATCH
DATA REJECTED
INVALID
SOFTWARE
DATA REJECTED
SOFTWARE
MISMATCH
DATA REJECTED
Description, Possible Causes and Solutions
The program could not successfully be written into Flash memory.
Defective Flash memory is a possible cause. Try the download again;
however, if the problem continues call for service.
The Application Firmware downloaded is not compatible with the Main
Logic Card, is for a different model printer, or is not supported by the
boot loader version. See Configuration Level.
A error was detected during download, possible causes and solutions
include:
•
An invalid or corrupted file was downloading. Try saving the file
again to the host, and then download it again to the printer.
•
A communications error. Recheck the cabling and the port
settings.
The software level being installed is not authorized for this printer. See
the Printer Key information.
102