Table of Contents
Advertisement
Ifleft and/or right indents are set in the Format Paragraph command,
[ and] indicate the left and right indents, respectively. A zero (0)
a ppears on the ruler to indicate the left margin if a left indent is set.
4. Press I
TAB
I to move to the overtype field. The proposed response is No.
Press the space bar to choose Yes if you want to use the Overtype typing
mode for this document. Ot appears on the status line when you carry
out the Options command.
5. Press I
TAB
I to move to the visible field. The proposed response is Yes.
Press the space bar to choose No if you do not want the new paragraph
and new line marks to appear on the screen for this document when you
carry out the Options command.
6. Press I
ENTER
I to carry out the Options command.
Print
Use the Print command to print documents. The Print command uses the
Printer settings from the System Manager Set Printer command.
Before using your printer, be sure you:
• Plug the printer power cord into an electric outlet.
• Connect the printer and computer with the printer cable.
• Turn on the printer, making sure that it is ready, or "on line."
• Be sure the printer contains sufficient paper and ribbon to print your
document. Properly align the paper according to the instructions for
your printer.
Once you set up your printer, print your document.
1. Press I
ESC
I to go to the Command mode.
2. Press
m
for the Print command. The screen shows:
PRINT to'
~
for'matted' ('ies)No
copies' 1
r'an'~e:
(All )Select.ion
P.=I'~es
pa':,1E< numbers:
3.
PRN
is the proposed response for the
PRINT
to command. Use this
response to print to the printer. Type COM to send the document to the
RS-232 communications port; type CON to print it to the console
screen. Type a filename to print the document to a text file.
70
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
"
(
(
(
(
(
(
(
(
\
Advertisement
Table of Contents
