Set; Set Clock - Tandy 600 Owner's Manual

)
)
)
)
)
)
Note: Ifthe named application cannot run the data file, an empty
work file is created for the application. The new work file has
the same name as the data file. An empty screen appears for
the new work file.
Set
)
)
)
}
)
Use the Set command to enter settings that affect the entire system. The Set
command consists ofa menu containing the Clock, Printer, Sleep, Tone,
and Wake subcommands.
Set Clock
Use the Set Clock command to set the system date and time.
I. Press []] for the Set command.
2. Press
IT]
orl
ENTER
I for the Clock subcommand (the proposed response).
The screen shows:
)
o;ET CLOCK datE'. 06-20.-1985
t. i
me:
11: ::::(1 : 15 Ar'11
SET CLDCK datE'. 1/1. . ···1986·
Sets the date at January 1, 1986. Sets the time at 12 : 00 : 30 am.
4.
Press
I
ENTER
I.
The new date and time appear on the status line of the
System Manager menu.
43
Sets the time at 12 : 08: 00 pm.
Sets the time at 12 : 00 : 00 pm.
Sets the time at 12 : 30 : 00 am.
:8:PM
PM
0:30
time:
time:
time:
Type a new date, in the format shown above, if the one shown is not
correct. There is no need to type leading zeros.
3. Press I
TAB
I. Type a new time if the time shown is not correct. (Skip the
field to default to 12: 00: 00 am.) When you type a time, you may leave
off hours, minutes, or seconds. Include AM or PM; no entry defaults to
AM. There is no need to type leading zeros.
)
)
)
)
)
}
}
)
)
)
)
)
)
)
)