Set Wake - Tandy 600 Owner's Manual

Set Wake
Use the Set Wake command to set the computer to tum on automatically at
a specified date and time and enter an application work file. Note that if
you plan to download a file to disk upon wake up, you must have turned off
the computer with the appropriate diskette inserted.
Note that the computer does not automatically wake up ifthere are any
unanswered alarms at the time specified for the wake up. (Refer to "The
Alarm" in the "Other Functions" section of this chapter.)
Similarly, if the computer automatically wakes up, performs some
function, then automatically shuts off again (Set Sleep), no alarms sound
until you manually turn on the computer.
(
(
(
{
(
(
(
t
(
(
I. Press []] for the Set command.
,
\
2. Press
c:Y\[]
for the Wake subcommand. The screen shows:
Type the name of the application to enter when the computer wakes up.
3. Press 1
TAB
I. Type the name of the work file to open when the computer
wakes up.
4. Press 1
TAB
I. Type the date on which you want the computer to wake
up. Follow the same rules for date entry as in the Set Clock command.
5. Press I
TAB
I. Type the time at which you want the computer to wake up.
Follow the same rules for time entry as in the Set Clock command.
\
(
(
(
(
(
(
(
(
(
(
(
(
~
(
file.
t. i
me: 12:
l1~j At'1
SET
~~AI<E" .~ppl
ication: I
dat.e: 0 .....
(1 ...··
[1
6. Press 1
ENTER
I. The computer wakes up automatically at the specified
date and time. The application screen for the specified file appears.
The cursor appears in the same position on the screen as when the file
was accessed last.
46
l
(
l