Changing Window Borders; Closing Windows - Tandy 600 Owner's Manual

Changing Window Borders
Use the Window Border command to add or remove a border for a specific
window.
I. Press[])\[] for the Window command.
2. Press []] for the Border command. The screen shows:
The current window is the proposed response. Use the proposed
response, or type the number ofthe window whose border you want to
change.
4. Press I
ENTER
I to carry out the Window Border command.
If the window already has a border, Border removes it; ifnot, Border adds
one. Because the border takes up I character position on each side of the
window, the screen shows less information. If you split a window that has
borders, the 2 resulting windows also have borders.
Closing Windows
Use the Window Close command to close windows opened with the
Window Split command.
I. Press
[]\7J
for the Window command.
2. Press
IT]
for the Close command. The screen shows:
3. The current window is the proposed response. Use the proposed
response, or type the number of the window you want to close.
4. Press I
ENTER
Ito carry out the Window Close command.
Multiplan increases the size of the remaining windows to fill the rest of the
screen and renumbers the windows. If there is only I window open,
Multiplan ignores the Window Close command. Closing windows does not
affect the contents of cells.
222
(
(
(
(
(
(
(
(
(
(
{
(
(
(
(
(
(
(
(
(
(
\
"