Choosing A Command; Choosing Or Filling In Command Fields; Carrying Out A Command - Tandy 600 Owner's Manual

Choosing a Command
Choose a command by placing the highlighted selection marker over it.
Press I
TAB
lor the space bar to move the selection marker over the next
command. Press I
SHIFT
II
TAB
lor I
BKSP
I to place the marker over the
previous command and press I
ENTER
L
You can also choose a command by pressing its initial letter ([[] for Run,
and so forth). The command fields for the specified command appear. If
there are no command fields, the command is carried out.
Choosing or Filling In Command Fields
Command fields appear only if a command requires additional information
in order to complete its action. Move between command fields withl
TAB
I
and I
SHIFT
II
TAB
L There are two types of command fields: menu and
prompt/response.
Menu command fields present two or more options from which to choose.
The current option, or proposed response, appears either highlighted or
surrounded by parentheses. Pressing the space bar chooses the next
option. I
BKSP
I chooses the previous option. You can also choose a menu
command option by pressing its initial letter
(OJ
for Justified, and so
forth). When the command field is correct, press I
TAB
I to move to the next
command field.
Prompt/response fields require you to fill in a response to a prompt. If the
proposed response is correct, press I
TAB
I to move to the next command
field. After you change a response, press I
TAB
I to move to the next
command field.
Carrying Out a Command
After you respond to all prompts, press I
ENTER
I to carry out the command.
If there are any errors in the command field entries, an error message
appears. If there are no errors, the application performs the action directed
by the command.
24
(
(
(
(
(
(
(
(
(
,
\
(
(
(
(
(
(
(
\
(
(
(
\