Lookup; Move - Tandy 600 Owner's Manual

Use the Move command to move the selected record (row) or column.
5. Press I
ENTER
Ito carry out the LookUp command.
The File tutorial contains an example using the LookUp command. Refer
to the tutorial for more information.
Move
Use
r1tat.chin·:.~
fields:
LOOKUP
In: •
Entet-· f
i 1e
name
1. Press I
SHIFT
I
[£[]
to select the column to receive the information.
[£§]
if you want to extend the selection to include more than one
column.
3. Type the name of the data base from which you are drawing the
information.
2. Press
OJ
for the LookUp command. The screen shows:
4. Press I
TAB
Ito move to the next field. Type the name (ID) of the column
or columns that File will use to find the information you want. Separate
a list of names with commas.
Use the LookUp command to fill all or part of one or more columns in one
data base (the destination) with information stored in another data base (the
source). The current data base is considered the destination. The
"lookup" columns in the source and destination data bases must have the
same name.
LookUp
»
)
)
)
}
)
)
)
)
J
)
,
)
}
)
)
)
)
)
)
1
1. Select the column or record to move by pressing I
SHIFT
I
[W
or I
SHIFT
I
[ill.
Select more than one row or column by pressing
[£§]
to extend the
selection, then pressing the appropriate arrow key.
}
)
)
)
J
)
)
2. Press
[M]
for the Move command. The screen shows:
3. The current column or record number is the proposed response. Type
the column or record number before which you want to move this
column or record.
4. Press I
ENTER
Ito carry out the Move command.
123