Formatting Column Widths - Tandy 600 Owner's Manual

2. Press[Q] for the Options subcommand. The screen shows:
FO~~t1AT OPT IONS
comm·:.s: l.r1es
~
3. The default for the commas field is No. Press the space bar if you want
commas to appear in numbers equal to and greater than 1000.
4. Press I
TAB
I to move to the formulas field. The default is No. Press the
space bar if you want to display the formulas used to arrive at the values
on the spreadsheet instead of the values themselves.
Formatting Column Widths
(
(
(
(
(
(
(
(
(
2. PressQi'I] for the Width subcommand. The screen shows:
I. Press OJ for the Format command.
6. Press I
ENTER
I to carry out the Format Width command.
Insert
\
(
(
(
(
(
(
(
(
(
(
(
(
(
trw'ough:
1 fORt'1AT ~~I[lTH in chat-·~. Ot-· d(efa1.Alt): dl column· 1
Use the Format Width command to change column widths on the
spreadsheet. (Use Format Default Width to change the column widths for
the entire spreadsheet.)
3. The proposed response is d, which uses the default width specified in the
Format Default Width command or the last width entered in the field.
Use the proposed response or type the number of characters for the
width(s) of the column(s).
4. Press I
TAB
I to move to the column field. The proposed response is the
current column (the one in which a cell is highlighted). Use the
proposed response, or type the reference for the first column to format.
S.
Press I
TAB
I to move to the through field. The proposed response is the
current column (the one in which a cell is highlighted). Use the
proposed response, or type the reference for the last column to format.
Use the Insert command to insert new, blank rows or columns any place in
the worksheet. Insert adjusts all references that the new row or column
affects. You cannot insert rows or columns if they cause the existing
spreadsheet to extend beyond the 2SS-column and 63-row limit.
(
(
(
212