Starting And Quitting Multiplan - Tandy 600 Owner's Manual

Starting and Quitting Multiplan
Multiplan is the last application name that appears on the System Manager
screen. When you first start the Tandy 600 or return to the System
Manager screen from another application, the cursor highlights the Word
application. Run is the default on the System Manager command menu.
To create a Multiplan file:
I. Use the arrow keys to place the cursor over PLAN, place the selection
marker over Run, and press I
ENTER
I. The Run command fields appear:
+=
i
1
e
2. Press 1
TAB
I. Type a name for the work file you are creating. If you do
not type a filename, Multiplan names your file WORK.
3. Press 1
ENTER
I. A Multiplan spreadsheet appears.
To run an existing Multiplan file:
I. Use the arrow keys to place the cursor over the name of the Multiplan
work file you want to run.
2. Place the command selection marker over Run, and press I
ENTER
I. The
Multiplan spreadsheet appears. The cursor appears in the same
position as when you last accessed the file. Multiplan begins in the
Command mode.
Quit the Multiplan application and return to the System Manager by
pressing I
CTRL
1
ITIQJ.
Quit the Multiplan application and return to the
previous application by pressing
I
CTRL
1
[£[].
174
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
<,
I
(
(
(
(
(
l