Table of Contents
Advertisement
)
)
)
}
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
I
)
)
)
)
)
}
3. I
PAUSE
1/ I
BREAK
I: Press I
PAUSE
I to temporarily stop a BASIC
program execution. Press any key to continue. Press I
BREAK
I ("I
S"'H"'IF=Tool
I
PAUSE
I) to cancel a command and return to the command menu.
I
BREAK
I in BASIC stops program execution.
4. I
PRINT
I: Press to print whatever is currently displayed on the screen.
(The screen prints correctly only on Tandy DMP series printers
capable of graphics, such as the DMP 120, DMP 130, DMP 200, DMP
400, DMP 420, DMP 430, DMP 500, DMP 2100, DMP 2 lOOP, and
DMP 2200. Additionally, the DIP switch on the printer must be set to
CR
=
CR.) In BASIC, press I
SHIFT
II
PRINT
I to print the entire file.
5. Function Keys: Press ITD
-o::IQ]
for predefined functions in each of
the applications, as well as for general functions throughout the
system. Use the function keys alone, with I
SHIFT
I, or with I
CTRL
I.
Refer to the chapters of this manual specific to each application for
more information on the function keys. Refer to "System Function
Keys" in the "System Manager" chapter for details on the function
keys used throughout the system.
6. Arrow Keys: Press these keys to move the screen cursor,
or
"scroll."
You can also use I
SHIFT
I and I
CTRL
I with the arrow keys. Refer to the
chapters of this manual specific to each application for more
information on the arrow keys.
7. !
BKSP
t /
I
DEL
I: Press I
BKSP
I to move the cursor back a space and
delete the character it moves over. Press
[Qill
(I
SHIFT
II
BKSP
I ) to
delete the selected text or the character currently under the cursor.
I
BKSP
I moves to the previous command in a command menu.
S
t
ENTER
I:
Press to insert a carriage return or to carry out a command.
Refer to "Carrying Out Commands" in the "System Manager" chapter
of this manual for more information.
9. I
SHIFT
I: Press!
SHIFT
I along with a character key to type the uppercase
letters and symbols on the keyboard. You can also use I
SHIFT
I with a
function or command key.
10. I
NUM
I: Press I
SHIFT
II
NUM
I to enable the 10-key pad. (Only the
I
SHIFT
I key on the right side of the keyboard works in conjunction with
thel
NUM
I key.) Press I
SHIFT
II
NUM
I again to return to normal
characters.
II. I
ALT
I: Use in conjunction with other keys; enter special characters.
12. space bar: Press to type a blank space on the screen. Press while in a
command menu to move to the next command field.
13.
I
LABEL
I:
Press to display function key labels for functions currently
available. Press with I
SHIFT
I to display SHIFT -functions available.
Press with!
CTRL
t
to display CTRL-functions available.
13
Advertisement
Table of Contents
