Run; Script - Tandy 600 Owner's Manual

Wait for Tone
The wait for tone field determines how long Teleom will wait for a dial
tone before it begins dialing. 5 seconds is the proposed response. Type a
number from I to 15 to change the proposed response.
Review Text Lines
The review text lines field determines how many lines can be reviewed
when you pause free forward scrolling.
Disconnect Time
The disconnect time field determines how long the Tandy 600 can remain
idle in the Teleom mode before communications are automatically
disconnected. Type a number from 1-99. Type 0 to prevent T elcom from
ever automatically terminating a connection.
Run
Use the Run command to run a script file you have created.
I. At the Session command menu, press []] for the Run command. The
screen shows:
F.:UN scr- i
pt: •
2. The last script file entered is the proposed response. Type the name of a
script file to change the proposed response.
3. Press I
ENTER
I to run the script. The script executes, entering Terminal
mode if a Connect command was entered.
4. Upon completion of your Terminal session, press
W
at the Script menu
to return to the Session command menu and the Command mode.
Script
Use the Script command to go to the Script mode. You prepare preset
communications, or "auto-logon" files in the Script mode. Auto-logon
files are especially useful for repetitious communication connections.
160
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
\.
(
(
(
(