Starting And Turning Off Yourcomputer - Tandy 600 Owner's Manual

Starting and Turning
Off YourComputer
Plug the power cord, which contains a DC 8V converter, into the opening
at the back of the left side of the computer. Insert the pronged plug into an
electrical outlet.
On both sides of the front of the computer case are ridged fasteners. Open
the Tandy 600 case by pressing the two fasteners at the same time. Lift the
hinged computer screen into the upright position.
Perform a cold start when you start your system the first time, immediately
after plugging it into an outlet or if the memory switch on the bottom of the
computer has been turned OFF. Refer to "Cold Starts" for more
information. The System Manager screen appears.
~[lI):"_I'
CHCFl'1CfA--P- I
FILE
TELCOt'1
F'LAt-J
Figure 5. System Manager Screen
Adjust the screen brightness with the display wheel (DISP) on the right side
of the computer.
8
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
{
(
(
(
(
(
l