Set Sleep; Set Tone - Tandy 600 Owner's Manual

)
)
)
)
)
)
)
1
}
)
)
}
}
)
)
)
)
)
)
)
)
)
)
)
}
)
)
Set Sleep
Use the Set Sleep command to enter the number of minutes the computer
can remain inactive before it automatically turns off.
1. Press W for the Set command.
2. PressW again for the Sleep subcommand. The screen shows:
Type the number of minutes the computer may remain inactive before it
turns off automatically. The default is 5 minutes.
3. Press
1
ENTER
I.
The computer turns off automatically after the specified
time ifno keys are pressed.
Set Tone
Use the Tone command to turn on or offan audible tone (beep) that
indicates the alarm and error conditions.
1. Press W for the Set command.
2. Press CO for the Tone subcommand. The screen shows:
The proposed response for the alarm is Audible. Press the space bar to
choose Mute.
3. Press I
TAB
I. The proposed response for error conditions is Audible.
Press the space bar to choose Mute.
4. Press I
ENTER
I.
If you choose an Audible alarm, the computer beeps and displays an alarm
indicator (
* )
on the status line whenever the Remind time is reached for an
event entered in Calendar. If you choose Mute, no beep is sounded;
*
appears on the status line.
If you choose an Audible tone for error conditions, the computer beeps and
displays an error message on the message line to indicate an invalid entry.
If you choose Mute, no beep is sounded; an error message appears on the
message line.
45