Run - Tandy 600 Owner's Manual

)
}
)
)
)
)
)
}
}
)
}
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Options
Use the Options command to set the Disk Reference function key
([U] )
to
alternate between data files stored in RAM memory and data files stored on
disk.
If you first set Options, then press ITTI, the System Manager screen displays
data files on disk instead of files in memory. PressITTI again to display
data files stored in memory on the System Manager screen.
To set Options:
1. Press
[]J
for the Options command. The screen shows:
OPTIONS drive:
d
2. Type a disk drive designation, or "name." The default, A, should be
used unless an auxiliary drive is connected.
3. Press
1
ENTER
I. The computer redraws the System Manager screen and
displays the disk files. The Disk Reference key, ITTI, is now set. After
you set it, simply press
[ill
to change the System Manager screen from
disk files to RAM files (or from RAM files to disk files).
It
is not
necessary to use the Options command again.
Press
[ill
to return to the RAM file display.
Run
Use the Run command to run an application, create a new file, or open an
existing file. Run is the proposed response on the System Manager
command menu. Because it is already highlighted, you can press
'IE"' N "' T "' E =-' R "I
to
carry out the Run command. If you have moved the marker to highlight
another command, press
[]J
for the Run command.
When you choose and carry out the Run command while the cursor is on
the Calendar or Telcom application, the first screen for the application
appears. Refer to the "Calendar" and "Telcom" chapters for instructions
on using these applications.
To create a new work file for Word, File, or Plan:
1. Use the arrow keys to place the cursor on the name of the application
you wish to run.
41