Print - Tandy 600 Owner's Manual

Options
Use the Options command to set up the way Multiplan calculates the
spreadsheet. You can set Multiplan to recalculate all cells each time you
change a cell (the default) or to recalculate only when you press
F4 .
You
can also choose iteration and set default completion test criteria.
I. Press
[Q]
for the Options command. The screen shows:
OPTION:=; i-ecalc:
i'm
rkl
iteration: Yes(No) oompletion test at.
':;e 1
ect
o~:d:.
i
Ot-j
2. The proposed response for the recalc field is Yes. Use the proposed
response, or press the space bar to choose No.
If you choose No, each new cell is calculated (based on the last values of
the other cells) when it is entered, but other cells that may be affected are
not recalculated. The entire spreadsheet is recalculated only when you
press
1m
or when you quit Multiplan and return to the System Manager
screen by pressing I
SHIFT
I [EIQJ.
3. Press I
TAB
Ito move to the iteration field. The proposed response is No.
Use the proposed response, or press the space bar to choose Yes.
If you choose Yes, Multiplan calculates values from formulas that form
a circle of references. Refer to "Using Iteration" for more information.
4. Press I
TAB
Ito move to the completion test at field. Enter a value in this
field only if you chose Yes at the previous field. Refer to "Using
Iteration" for more information.
5. Press I
ENTER
Ito carry out the Options command.
Print
Use the Print command to print a spreadsheet or portion of a spreadsheet.
Choose the device (printer or file), area, and style in which it is printed.
Before you print a spreadsheet, be sure your printer is connected properly,
turned on, and ready to print.
Multiplan uses the printing format from System Manager's Set Printer
command. It prints as many columns across the page as will fit. Any
columns left over print on a second page.
218
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
\
\
\
(
(
(
(
\