Jump; Jump Page; Jump 0/0 - Tandy 600 Owner's Manual

1
}
, Jump
~
Use the Jump command to move, or "jump," to a specific page or a certain
place in a document. The Jump command consists ofa menu containing
the Page and % subcommands.
Jump Page
Use the Jump Page command to jump to a specific page. Only documents
that have been printed or repaginated (Format Repaginate) contain pages
that you may access with the Jump command. Refer to "Format" in this
chapter for more information on repagination.
1. Press
llitJ
to go to the Command mode.
2. Press
Q]
for the Jump command.
3. Press W orl
ENTER
1
for the Page subcommand (the proposed response).
The screen shows:
,JUr'1P PAGE numbet-·: ~
. •
4. Type the number of the page you want. Press
1
ENTER
I.
Jump Page moves to the specified page according to the page breaks
assigned during the last printing or repagination. The cursor appears on
the first character of the page. If the document has not been printed or
repaginated, Jump Page moves the cursor to the first character of the
document.
Jump
0/0
Use the Jump % command to jump to an approximate place within a
document (the first half, the last third, and so forth).
1. Press
I
ESC
1
to go to the Command mode.
2. Press
Q]
for the Jump command.
3. Press the space bar to move to the % subcommand, and press I
ENTER
I.
The screen shows:
67