Table of Contents
Advertisement
Add to EOL
The add to EOL field corrects files you are receiving incorrectly. Choose
none, carriage return (CR), or linefeed (LF). The proposed response is
none. Choose LF, for example, iflines are written on top of one another.
Choose CR to add a carriage return to the end of each line if incoming data
lines step across the screen.
line ends here
line ends
here
Strip Linefeeds
The strip linefeeds field removes, or "strips," extra blank lines that
sometimes appear in files transferred without protocol. Choose yes if an
extra blank line appears between each text line.
Filter Characters
The filter characters field determines whether or not incoming control
characters are filtered out. Choose yes to ignore control characters.
Options
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
I. At the Session command menu, press
[Q]
for the Options command.
The screen shows:
Use the Options command to set some global values for Telcom that reduce
the repetition often encountered during communications.
DF'TIDN:3
(
,
(
(
\
2. Type new responses for the fields, as needed. Press I
TAB
I to move
between the fields. Press the space bar to move between the menu-type
responses in the dialing type and speed fields. Type new values for the
other fields. Details of the command fields are presented at the end of
this section.
3. Press I
ENTER
I to carry out the Options command after all the command
field entries are correct. The options go into effect each time you use
Telcom.
158
(
(
(
t
(
\
(
(
Advertisement
Table of Contents
