Care And Cleaning - Sharp R-899R Operation Manual

CARE AND CLEANING

IMPORTANT:
Disconnect the power supply cord before cleaning or leave the door open to inactivate the
oven during cleaning. Before cleaning, make sure the oven door, outer cabinet, oven cavity and
accessories are completely cool.
CLEAN THE OVEN AT REGULAR INTERVALS - Keep the oven clean and remove any food
deposits, or it could lead to deterioration of the surface. This could adversely affect the life of the
appliance and possibly result in a hazardous situation.
Exterior:
The outside may be cleaned with mild soap and warm water, wipe clean with a damp cloth. Avoid
the use of harsh abrasive cleaners. Keep the ventilation openings free of dust.
Door:
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a
damp cloth to remove any spills or spatters. Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can scratch the surface, which may result in
shattering of the glass.
Touch Control Panel:
Wipe the panel with a cloth dampened slightly with water only.
Do not scrub or use any sort of chemical cleaners. Avoid the use of excess water.
Interior walls:
Wipe spatters and spills with a little dishwashing liquid on a soft damp cloth. For heavier stains
inside the oven cavity only, use a mild stainless steel cleaner applied with a soft damp cloth.
Do not apply to the inside of the door. Wipe clean ensuring all cleaner is removed. After use, wipe
the waveguide cover in the oven with a soft damp cloth to remove any food splashes. Built-up
splashes may overheat and begin to smoke or catch fi re. Do not remove the waveguide cover.
DO NOT USE CAUSTIC CLEANERS, ABRASIVE OR HARSH CLEANERS OR SCOURING PADS ON
YOUR OVEN. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF YOUR OVEN.
DO NOT USE A STEAM CLEANER. Avoid using excess water. After cleaning the oven, ensure any
water is removed with a soft cloth.
NOTE:
At regular intervals, heat the oven referring to "Heating without Food" on page E-6. Because, the
splashed dirt or food oil remained around oven walls may cause the smoke and odour.
Accessories:
Wash with mild soapy water and dry thoroughly.
NOTE:
Keep the waveguide cover and accessories clean at all times. If you leave grease or fat in the
cavity or accessories, it may overheat, cause arcing, smoke or even catch fi re when next using
the oven.
E – 18