Chapter 9. Spectrum24 Network Configuration; Introduction - Symbol PDT 8100 Series Product Reference Manual

Spectrum24 Network Configuration

Introduction

Wireless LANs allow terminals to communicate wirelessly, and to send captured data "real
time" to a host device. Before a terminal can be used on a Spectrum24 LAN, your facility
must be set up with the equipment required to run the wireless LAN and the terminal must
be properly configured. Refer to the documentation which came with your access points for
instructions on setting up the required hardware.
The PDT 8146 terminal Spectrum24 settings and NICTT settings configure and monitor the
Spectrum24 connection.
9-3