32
en | Fixing the Top Unit
8
Fixing the Top Unit
Warning!
!
Hazardous Moving Parts. Keep Fingers and Other Body Parts Away.
To attach the top of the unit to the base, follow these steps. If re-assembling after repair, be
sure to replace the screw seals. This will ensure that the device remains watertight.
Figure 8.1: Attaching the Top Unit
Reference
1
2
3
4
5
6
1.
2.
3.
4.
2013.11 | 5.2 | F.01U.291.981
2
3
4
5
Description
Base
Gasket
Screw seals (4)
Washers (4)
Screws (4)
Configuration Window
Align the tabs on the top unit with the tabs on the base so that both parts are positioned
correctly.
Push down to snap into place.
Apply thread locker (such as Loctite 243) on the holes of the screws.
Attach the top unit to the base using the attachment screws and screw seals (supplied).
Operation Manual
High-Speed Positioning System
(HSPS)
Bosch Security Systems, Inc.