36
en | Assembling and Connecting IR360 Models (optional)
Figure 9.3: Fitting the Spotlight on the Bracket
Reference
1
2
3
4
5
6
7
Danger!
During normal operation, the surface of the spotlight can reach very high temperatures. Do not
allow direct contact. Ensure to position the product where it is inaccessible to unauthorized
persons.
9.4
Connecting the Spotlights
Connecting the Infrared LED Spotlights
1.
2.
3.
4.
5.
2013.11 | 5.2 | F.01U.291.981
Description
Gasket
Bracket
Spotlight
Crinkle washer
Nut
Screw
Washer
Open the housing.
Extract the support plate from the housing.
Disconnect the flat cable.
Disconnect the relay power supply connector.
Remove the screws.
Operation Manual
High-Speed Positioning System
(HSPS)
Bosch Security Systems, Inc.