Bosch UPH series Operation Manual page 16

16 en | Installing the Camera/Lens
Figure 4.2: Install Camera/Tray
4.
Notice!
A partially blocked view may result if the camera is not pushed up close to the front of the
housing.
Figure 4.3: Attach Camera to Housing
5.
6.
2013.11 | 5.2 | F.01U.291.981
Reposition the camera/lens mounting tray by sliding it forward so that the lens is as close
to the front window as possible. Insert and tighten the four M4 x 10 screws and the four
washers (contained in the Cable and Screws accessory bag) as shown in the figure
"Attach Camera to Housing" below.
Locate the sealed plastic bag containing the desiccant bag.
Place the desiccant bag inside the housing as shown in the figure below, with the
desiccant bag secured into position by the metal fixing accessory and two fixing screws
(supplied in the Desiccant accessory bag).
Operation Manual
High-Speed Positioning System
(HSPS)
Bosch Security Systems, Inc.