Table of Contents
Advertisement
52
en | Configuring the System
> 1ABC 2DEF
Table 12.4: Edit Text Menu
Offset Pan
By default, the offset pan is +0.00. The value can be changed to move the default pan position
of the unit to wherever is convenient. For example, if the installation requires that the NORTH
position should be at 0.00 ° (pan), then an offset pan can be entered to compensate for any
deviation from NORTH. After mounting, the NORTH position was found to be +41.37 ° (pan
position); therefore, the offset pan should be set to - 41.37 ° to make the pan +0.00 ° position
point to NORTH.
This has an effect on the Area Title as defined in the Area Position menu. In the above
example, after the offset pan has been set to -41.37 °, the Area Text Menu "1 - Area" could be
changed to "1 - NORTH" to display NORTH on the screen at pan +0.00 ° position.
12.2.3
Display Parameters
The Display Parameters menu is used to enter the settings menus for the device movement
parameters.
DISPLAY PARAMETERS
> 1 - OSD VIDEO ENABLING
2 - VIDEO CHAR TYPE
3 - HORIZONTAL DELTA
4 - VERTICAL DELTA
5 - ADDRESS NUMBER
2013.11 | 5.2 | F.01U.291.981
EDIT TEXT MENU
v _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_
Test Area 1
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3GHI
5MN
6PQR
7STU
O
9YZ
0()*
+,-.
4JKL
8VWX
: Y
: 000
: 000
: 000
Y
Operation Manual
High-Speed Positioning System
(HSPS)
Bosch Security Systems, Inc.
Advertisement
Table of Contents
