Important Notices - Bosch UPH series Operation Manual

High-Speed Positioning System
(HSPS)
9.
10. Replacement parts - Be sure the service technician uses replacement parts specified by
11. Safety check - Safety checks should be performed upon completion of service or repairs
12. Installation - Install in accordance with the manufacturer's instructions and in accordance
Notice!
This product must only be used with a UR marked camera, rated 6-12 VDC with a maximum
power consumption of 5 W and a flammability class V-0 and Product Category NWGQ2,8.
13. Attachments, changes or modifications - Only use attachments/accessories specified by
1.5

Important Notices

Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL
2044. UL Certification does not cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
–
–
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
Bosch Security Systems, Inc.
Damage requiring service - Unplug the unit from the main AC power source and refer
servicing to qualified service personnel when any damage to the equipment has occurred,
such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating
instructions.
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
to the unit to ensure proper operating condition.
with applicable local codes.
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority
to operate the equipment.
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause
undesired operation.
Operation Manual
Safety | en 7
2013.11 | 5.2 | F.01U.291.981