Connecting The Camera And Motorized Lens - Bosch UPH series Operation Manual

18 en | Installing the Camera/Lens
4.3

Connecting the Camera and Motorized Lens

Figure 4.5: Make Connections (LTC 0498 Dinion 2X camera shown)
Reference
1
2
3
4
5
1.
2.
3.
2013.11 | 5.2 | F.01U.291.981
J7
J2
Description
8-pin DIN connector
4-pin iris override connector
2-pin power cable
4-pin alarm cable
VIDEO IN connector
Connect the 8-pin DIN connector zoom and focus control cable from the camera to the J5
location on the board. Secure cable in up-right position by using supplied tie wrap.
If applicable (LTC 3293/30 manual override units only), connect the 4-pin iris override
connector from the camera to the J2 location on the board.
Connect the 2-pin power cable from the camera to the mating connector from the J26
location on the board.
J5
J1
Operation Manual
High-Speed Positioning System
J22
J27
J26
Bosch Security Systems, Inc.
(HSPS)