Connecting To The Standard Base - Bosch UPH series Operation Manual

30 en | Connecting to the Standard Base
6

Connecting to the Standard Base

The standard base has a 19-pin connector for which the following connections are illustrated:
Figure 6.1: Base with 19-pin Connector for Connecting Peripherals
Reference
F1 and F2
O1-C1 and O2-C2
(O=Output, C=Common)
AL1, AL2, AL3, and AL4, COM Alarm inputs 1-4, voltage-controlled (10-35 VDC supplied
Warning!
!
The installation is type TNV-1. Do not connect it to SELV circuits.
2013.11 | 5.2 | F.01U.291.981
Description
Feed 1, 24 VAC for optional washer; Feed 2, 24 VAC for
optional washer
Dry contact output that can be activated by alarm or by user
(50 VDC or 30 VAC @ 1A)
externally), referred to common COM
Operation Manual
High-Speed Positioning System
(HSPS)
Bosch Security Systems, Inc.