Press In Bearing Cap; Install Link Yoke; Install Centering Kit - Jeep 200 Cherokee Service Manual

XJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 29 Press In Bearing Cap
(6) Flip the propeller shaft yoke and install the
bearing cap onto the opposite trunnion. Install a
snap ring (Fig. 30).
Fig. 30 Press In Bearing Cap
(7) Fit the link yoke on the remaining two trun-
nions and press both bearing caps into place (Fig.
31).
(8) Install snap rings.
Fig. 31 Install Link Yoke
(9) Install the centering kit assembly inside the
link yoke making sure the spring is properly posi-
tioned (Fig. 32).
Fig. 32 Install Centering Kit
PROPELLER SHAFTS 3 - 13