When The Chart Paper Is Not Fed At All; When The Chart Paper Is Not Fed Properly - Toho Electronics TRM-10C Instruction Manual

10.1.7

When the Chart Paper is not fed at All

Flow chart 6
No chart paper feed at all
Chart paper fed by
FEED key?
‚ m ‚ n
Chart holder
attached properly?
‚ m ‚ n
Attach properly
(See 5.1 on Page 23)
10.1.8

When the Chart Paper is not fed Properly

Flow chart 7
Chart paper feed improper
Chart guide
attached properly?
‚ x ‚ d ‚ r
Chart cover locked
properly?
‚ x ‚ d ‚ r
Chart paper set
properly?
‚ x ‚ d ‚ r
Used in adequate
environment?
‚ x ‚ d ‚ r
Contact our dealer where you
purchased the instrument, or our
sales representative.
‚ x ‚ d ‚ r
DI contact for
remote operation
OFF?
‚ x ‚ d ‚ r
Contact our dealer where you
purchased the instrument, or our
sales representative.
‚ m ‚ n
‚ m ‚ n
‚ m ‚ n
‚ m ‚ n
97• \
Alter chart paper feed
start/stop setting.
‚ x ‚ d ‚ r
Turn on the DI contact
(See• @ 7.2.9 on Page 77)
‚ m ‚ n
Attach properly
(See 5.1 on Page 23)
Attach properly
(See 5.1 on Page 23)
Attach properly
(See 5.1 on Page 23)
Secure an adequate
environment
(See 11.1.5 on Page 101)
HXPRM10mnCT001E