Toho Electronics TRM-10C Instruction Manual page 48

 
(Zero-side scale value) (• – 1)
 
(Decimal point)
 
(Span-side scale value)• @ (• – 2)

[Note]
An entry of an incorrect numeral displays errors
 
• @ • @
Press the • g ENT• h key and re-enter a correct numeral.
FEED
PRINT
FEED PRINT
ENT
PRINT FEED
ENT
ENT

 
or • @ • @ • @
47• \
Use the • ¢ key to select a numeral.
Use the  key to shift a digit.
Press the  key again in the lowest digit(right end)
to blink a decimal point. Use the • ¢
decimal point position. Press the "ENT" key.
Use the • ¢ key to select a numeral.
Use the  key to shift a digit. Press the • g ENT• h key.
Press the • g ENT• h key. Setting is completed.
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.

or
.
key to select a
HXPRM10mnCT001E