Setting The Unit - Toho Electronics TRM-10C Instruction Manual

7.1.3 Setting the Unit

Setting Items
Set the unit for each channel.
[Note]
If you change the unit in the range of ,  or , setting the range to .
Operation
Setting

Example) Setting the unit(• Ž ) for Channel 1.
Display


  
(Code No.)
  
  

[Note]
The unit setting effects only when the range setting is ,  or 
(including ,  and  selected  as the reference channel).
When the range setting is others, the unit sets appropriate unit for the range automatically.
Channel Char. No.








Operation keys
ESC
3sec
MENU
ENT
PRINT
ENT
PRINT
PRINT
FEED
ENT
PRINT
FEED
ENT
PRINT
FEED
ENT
ENT
Code No.
   
• i • K • j
   
• @ • @ • @ • @
• i C• j
   
End
Description
Hold down the • g MENU• h key for 3 seconds or more
to enter the setup mode. Use the • ¢
"". Then, press the • g ENT• h key.
Use the • ¢ key to select the channel you want to set.
Then, press the • g ENT• h key.
or  key to select the 1st character of
Use the • ¢
the code number, and press the • g ENT• h key.
See Characters Code Table on the next page.
Set the 2nd character in the same manner.
When the number of unit characters is less than 6,
enter a code() to end. Press the • g ENT• h key.
Press the • g ENT• h key. Setting is completed.
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.
56• \
key to display
HXPRM10mnCT001E