(Comment Words) - Toho Electronics TRM-10C Instruction Manual

(6)• @ (Comment Words)
Example) When setting "ON" for Comment 1().
Display



  
(Setting of 1st Character)
  
(Setting of 2nd Character)
  
(Setting of 3rd Character)

(Setting of 9th Character)

(Setting of 10th Character)

(Setting of 11th Character)

(Setting of 16th Character)

• m Note• n
l When the number of comment characters is less than 16, set the "" code next to the last
characters. See page 57 for Character Code Table.
l The digit is not display after setting the "".
l The comment setting is not effective without the DI option. Do not set the comment setting.
Operation keys
ESC
Hold down the • g MENU• h key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
ENT
PRINT
Display "" and press the • g ENT• h key.
Set "" as the 1st character. Use the • ¢
PRINT
FEED
select a code, and use the  key to shift a digit.
ENT
Press the • g ENT• h key.
Set "" as the 2nd character.
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character to end.
Set "" as the 3rd character.
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character.
Repeat setting for each channel.
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.
66• \
Description
key to display "", and press the
key to select a comment number.
HXPRM10mnCT001E
key to display "
key to