Outputting The Unit And Decimal Point Position Data; Specifying The Unit And Decimal Point Position Data Output; Updating The Data; Outputting The Data - Toho Electronics TRM-10C Instruction Manual

8.4

Outputting the Unit and Decimal Point Position Data

8.4.1

Specifying the Unit and Decimal Point Position Data Output

• @ ‚ s ‚ r ‚ Q • i ‚ b ‚ q • j • i ‚ k ‚ e • j
Once this command is received, the recorder transfers the unit and decimal point position data to the
transmit buffer, when the (ESC) T command is received.
8.4.2

Updating the Data

• @ • i ‚ d ‚ r ‚ b • j ‚ s • i ‚ b ‚ q • j • i ‚ k ‚ e • j
Once this command is received, the recorder transfers the update unit and decimal point position data
to the transmit buffer. • @ • @ • @ • @ • @
8.4.3

Outputting the Data

• @ ‚ k ‚ e • C ‚ r • Q ‚ b ‚ g • C ‚ d • Q ‚ b ‚ g
‚ r • Q ‚ b ‚ g :Output start channel ‚ O ‚ P to ‚ O ‚ U
‚ d • Q ‚ b ‚ g :Output end channel ‚ O ‚ P to ‚ O ‚ U
• ¦ • @ When the number of channels is one, specify (S_CH) = (E_CH).• @ • Q (Space)
8.4.4

Data Format

‚ P • j • i ‚ c ‚ r ‚ Q • j • i ‚ b ‚ g ‚ m ‚ • • D • j • i ‚ t ‚ m ‚ h ‚ s
• @ • i ‚ c ‚ r
(1) ‚ c ‚ r ‚ P
N
D
S
M
R
C
O
S
(2) ‚ c ‚ r ‚ Q
‚ d
• Q (Space)
(3) ‚ b ‚ g ‚ m ‚ • • D :Channel number (2bytes) ; ‚ O ‚ P • ` ‚ O ‚ U
(4) UNIT ‚ P to ‚ U :UNIT
Returns the set unit in terms of code. (When sending the 7-bit data, the higher 1 bit is missing.)
(5) ‚ c ‚ o :Decimal point information (1 byte) ; ‚ O • ` ‚ S
[Note]
By the range setting, a decimal point position may differ from a display screen.
• @ • @ • @ • @ • @ • @ • @
‚ P • ` ‚ U • j • i ‚ c ‚ o • j
:Data information 1 (1 byte)
: Normal
: Difference computation data
: Sum computation data
: Average computation data
: Square root computation data
: Decade computation data,
: Over range (Data = • } 99999)
: Skip (All the data are spaces)
:Data information 2 (1 byte)
:Final data,
:Other data
87• \
HXPRM10mnCT001E