Alarm Hysteresis; Burnout On/Off; Channel Offset - Toho Electronics TRM-10C Instruction Manual

7.2.1 Alarm Hysteresis

Setting 0.5 % hysteresis to the values at alarm activation and alarm recovery is possible. (Common to
all the alarms)
Example) When turning off alarm hysteresis.
Display


• @ • @

7.2.2 Burnout ON/OFF

Setting Burnout High (to deflect the recording over the span) for each channel is possible.
Example) When setting Burnout High for Channel 4.
Display


• @ 
• @

7.2.3 Channel Offset

For channel offset setting, set the value to be added to an actual process variable.
Example) When setting the value (3.0) to be added to Channel 3.
Display



Operation keys
ENT
Enter the engineering mode (See the key operation
in page 67). Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 67). Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 67). Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
PRINT
FEED
shift a decimal point. Use the  key to shift a digit.
ENT
Once the numerical value is decided, press the
• g ENT• h key.
70• \
Description
key to display
key to display "", and press the
Description
key to display
key to display "", and press the
key to select "", and press the
Description
key to display
key to select "", and press the
key to alter a sign/numerical value or
HXPRM10mnCT001E