(Tag) - Toho Electronics TRM-10C Instruction Manual

(5)• @ (Tag)
Example) When setting "ABCD" for Channel 1.
Display



  
(Setting of 1st Character)
  
(Setting of 2nd Character)
  
(Setting of 3rd Character)
  
(Setting of 4th Character)
  
(Setting of 5th Character)

[Note]
When the number of tag characters is less than 7, set the "" code next to the last characters. See page
57 for Character Code Table.
Operation keys
ESC
Hold down the • g MENU• h key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
ENT
PRINT
and press the • g ENT• h key.
Set "" as the 1st character. Use the • ¢
PRINT
FEED
select a code, and use the  key to shift a digit.
ENT
Press the • g ENT• h key.
PRINT
FEED
ENT
• @ • @ • @ • @
PRINT
FEED
• @ • @ • @ • @
ENT
PRINT
FEED
ENT
Set "   " as the 5th character and press the
PRINT
FEED
• g ENT• h key.
ENT
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.• B
65• \
Description
key to display "", and press the
key to select the channel you want to set,
Set the 2nd through 4th characters in the
same manner.
key to display
key to
HXPRM10mnCT001E