Settings Related To Recording; Recording Start/Stop Trigger Setting; Tag/Channel Print Selection - Toho Electronics TRM-10C Instruction Manual

7.2.6 Settings Related to Recording

Setting a recording start/stop trigger, select tag/channel print selection, alarm print, logging print, and
scale print ON/OFF is possible.
(1)• @ Recording start/stop trigger setting
Set whether the trigger of recording start/stop should be by the • g RUN• h key or DI.
Example) When setting DI as the recording start/stop trigger.
Display


• @ 

• m Note• n
When displays "", • g RUN/STOP• h key does not operate. Set "
See DI functions in page 77.
(2)• @ Tag/channel print selection
In case of logging print; or manual print, set whether a tag or channel should be printed.
Example) When setting the tag.
Display




Operation keys
Enter the engineering mode (See the key operation
ENT
in page 67). Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
PRINT ENT
• g ENT• h key.
Setting is completed. Returned to the Recording
PRINT
FEED
Start/Stop Setting screen.
ENT
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 67). Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
PRINT ENT
• g ENT• h key.
Setting is completed.
Returned to the Tag/Channel Setting screen.
73• \
Description
key to display
key to select "", and press the
key to display "", and press the
 to DI.
• h
Description
key to display
key to select "", and press the
key to display "", and press the
HXPRM10mnCT001E