Device Setting; Setting The Setup Mode - Toho Electronics TRM-10C Instruction Manual

7.1 Setting the Setup Mode

Key Operation for Entering the Setup Mode
Press the • g MENU• h key for 3 seconds or more to enter the setup mode.
At the time, displays the version of the software approximately 1 seconds as below. After, displays the
setting screen of the range.
To return from the setup mode to the recording mode (user mode), press the • g MENU• h key for 3
seconds or more again.
The following describes how to set the following items.
The following shows a display map of the setup mode. Use the • ¢ key to operate.
l 7.1.1• @ Setting the Range
Setting
  
l 7.1.2• @ Setting the Alarm
Setting
  



• @ • @ • @ • @
Channel Mode

 





 




Channel Level ON• ^ OFF
   
 
 
 
 

Current/ Voltage Input
Thermocouple Input
Resistance temperature detector Input
Scaling
Square Root
Decade
Difference
Sum
Average
Skip
Type Setting value
 



40• \
Option
Relay ON• ^ OFF Relay No.

 
 

HXPRM10mnCT001E