Toho Electronics TRM-10C Instruction Manual page 3

Input and Output Wiring
Transportation
Inside of Instrument
Instruction Manual
Installation
Maintenance
Disposal
Cleaning
Revisions
CAUTION
Do not use empty terminals for other purposes such as relaying, etc.
Do not touch the switches, etc. inside this instrument. Also, do not replace the
main unit or PRINTed circuit boards. When this is neglected, we cannot
guarantee functioning of the instrument.
purchased the instrument, or our sales representative.
When transporting this instrument or the equipment with this instrument
incorporated in it, take measures to prevent opening the door and falling out the
inner module.
[Note]
(1) Deliver this instruction manual to an end user.
(2) Prior to handling this instrument, be sure to read this manual.
(3) If you have any questions on this manual or find any errors or omissions in
this manual, contact our sales representative.
(4) After reading this manual, keep it carefully by the instrument.
(5) When the manual is lost or stained, contact our sales representative.
(6) It is prohibited to copy or reproduce this manual without our permission.
(1) When installing this instrument, put on a protective gear such as safety
shoes, helmet, etc. for your safety.
(2) Do not put your foot on the installed instrument or get on it, because it is
dangerous.
Only our serviceman or persons authorized by OHKURA are allowed to remove
and take the inner module, the main unit and PRINTed circuit boards apart.
(1) Dispose the replaced batteries in a correct way.
(2) Do not incinerate plastics of maintenance parts and replacement parts. A
harmful gas may be produced.
(1) Use dry cloth to clean the surface of this instrument.
(2) Do not use any organic solvent.
(3) Cleaning the instrument after turning off the power.
This instruction manual is subject to change without prior notice.
2• \
Contact our dealer where you
HXPRM10mnCT001E