(3)• @ (Partial Compression/Expansion)
Example) When setting Channel 1 scale of 0 to 1,000.0 • Ž
0 • Ž
500.0 • Ž
(0%)
(30%)
Display
• @ • @
• @
[Note]
If you enter an incorrect numeral, displays an error
Press the • g ENT• h key and re-enter a correct numeral.
1000.0 • Ž
100%)
Operation keys
ESC
3sec
Hold down the • g MENU• h key for 3 seconds or more
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
ENT
PRINT
and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Set a boundary point position in percentage (%).
PRINT
FEED
Use the • ¢
ENT
key to shift a digit. Press the • g ENT• h key.
Set a boundary point position to "0500.0". Use the
PRINT
FEED
key to select a numeral, and use the key to
• ¢
ENT
shift a digit. Press the • g ENT• h key.
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.
63• \
to 500.0 • Ž
at a boundary point of 30 %.
Description
key to select "", and press the
key to select the channel you want to set,
key to select "", and press the
key to select a numeral, and use the
.
HXPRM10mnCT001E
key to display
Need help?
Do you have a question about the TRM-10C and is the answer not in the manual?