Table of Contents
Advertisement
(1)• @ (Printing Cycle)
Example) When setting the printing cycle to 60 seconds.
Display
• @ • @ • @
(2)• @ (Zone Recording)
Example) When setting the instrument so that Channel 1 zero/span will be recorded at the position of
20 to 50 %.
Display
• @ • @
(Setting of Left-end Position)
• @
• @
(Setting of Right-end Position)
[Note]
If you enter an incorrect numeral, displays errors
Press the • g ENT• h key and re-enter a correct numeral.
Operation keys
ESC
Hold down the • g MENU• h key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
the • g ENT• h key.
Use the • ¢
ENT
PRINT
and press the • g ENT• h key.
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.
Operation keys
ESC
Hold down the • g MENU• h key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
"", and press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Use the • ¢
ENT
PRINT
and press the • g ENT• h key.
Set a zero point printing position in percentage (%).
PRINT
FEED
Use the • ¢
ENT
key to shift a digit. Press the • g ENT• h key.
Set a span printing position in percentage (%).
PRINT
FEED
Operate in the same manner as setting the zero
ENT
point printing position.
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.
62• \
Description
key to display "", and press
key to select the printing cycle "",
Description
key to display "", and press the
key to select the channel you want to set,
key to select a numeral, and use the
,
HXPRM10mnCT001E
key to display
key to display
.
Advertisement
Table of Contents
Need help?
Do you have a question about the TRM-10C and is the answer not in the manual?