(Skip) - Toho Electronics TRM-10C Instruction Manual

(7)• @ (Skip)
Setting SKIP on the Channel does not display and recording.
Example) When skipping Channel 6.
Display




[Note]
Setting all the channels to Skip displays an error,
At least, one channel should be set to measurement.
About Skip
l The skip channel conducts measurement, but does not provide display, print, or alarm
judgment. If input is not connected, short-circuit a measurement terminal.
Operation keys
ESC
Hold down the • g MENU• h key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the • ¢
ENT
PRINT
"". Press the • g ENT• h key.
Use the • ¢
ENT
PRINT
Press the • g ENT• h key.
Use the • ¢
ENT
PRINT
• g ENT• h key.
Press the • g ENT• h key. Setting is completed.
ENT
To return to the user mode, hold down the • g MENU• h
key for 3 seconds or more.

53• \
Description
key to select the channel you want to set.
key to select "". Press the

.
HXPRM10mnCT001E
key to display