Toho Electronics TRM-10C Instruction Manual page 39

(2) Engineering list print stopping procedure
‡ @ Press the "MENU" key.
‡ A Use the "PRINT" key to display "
‡ B Use the "PRINT" key to select "
However, print operation continues until the line is completed.
Engineering list print stopped. And the display returned to it was prior to starting engineering list print.
RUN/STOP Internal/External
Switch Set value
: INT (key)
Alarm Hysteresis Set value
: ON
Setting of Burnout
Protection, RJC, and
Constant value in external
RJC, Offset, and Recording
Color for Each Channel.
 , and press the "ENT" key.
 . Pressing the "ENT" key stops engineering list print.
• @ • @ • @ ENGINEERING LIST
RUN CH• ^ T AG ALM_PR
INT • @ • @ CH ON1
DGT_PR START
ON 00:00 6h
ALM _HYS TEMP
ON • Ž
CH B.OUT RJC ƒ Ê V (REFCH)
1 OFF INT
2 OFF INT
3 OFF INT
4 OFF CH
5 OFF EXT 798
6 OFF CH (CH5)
COM_ADR SPEED
01 9600bps 8bit
DI 1:OFF 2:OFF
DI Function Set value.
Effective with the DI option.
Fig. 6.5• @ Engineering List Print
• h
• h
Channel Number /Tag Number Set
value : CH
INTERVAL SCL_PR
OFF SYNC
Temperature Unit :• Ž
OFFSET COLOR
0.0 PRP
0.0 RED
0.0 GRN
0.0 BLU
0.0 BRN
0.0 BLK
DATA PARITY STOP
NONE 1bit
3:OFF
38• \
Alarm Print Set value
: ON1 (occurrence/recovery)
SYNC/ASYNC
Logging Print Set value: ON/OFF,
Start Time, Interval, Scale Print:
Printout: Sync./Async.
Logging Print: ON,
Start: 00:00,
Interval: 6h,
Scale Print: OFF
Printout: Sync.
Communication Set value
HXPRM10mnCT001E
ON/OFF,