Display Screen And Operation Keys; Display Screen - Toho Electronics TRM-10C Instruction Manual

2.2 Display Screen and Operation Keys

2.2.1 Display Screen

The following describes the display screen. Since the channel numbers and data are indicated by a 7-
segment LED, alphabets are symbolized to represent them.
For the LED display, see " Symbolized Alphabets for Display" at [Reference] below.
Channel No. Display
Indicates a channel
number in orange.
Status Display
The "RUN" lamp (orange) is illuminated when
recording. The "ALM" lamp (red) is illuminated
when the alarm is being activated.
that the lamp• @ goes out and
is illuminated.
• @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @
[Reference]• @ Symbolized Alphabets for Display
CH.No • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @ • @
H

L
RUN• @ • @ ALM
 
Display
Alphabet A B
 
Display
Alphabet M N
Alarm Type Display
Indicates an alarm type in red.
"H" is illuminated when the alarm is High.
And "L" is illuminated when the alarm is
Low. Neither of them is illuminated when
there is no alarm.
    
• @ • @ • @ • @ • @ • @ • @ • @ ESC • @ • @ • @ • @
RUN • @ • @ MENU• @ • @ PRINT• @ • @
denotes
denotes that it
Fig. 2.2 Display
   
C D E F
   
O P Q R
10• \
Indicates the process
DATA
• £
FEED
Operation Keys
Use these keys for setting and
other operations.
    
G H ‚ ˆ I J
    
S T U V W
Data Display
variable, time, setting
screen, etc. in orange.
ENT
  
K L ‚ Œ
  
X Y Z
HXPRM10mnCT001E