Capturing In Color Or Monochrome - PolyVision CopyCam Installation And Operation Manual

C
APTURING IN
CopyCam normally captures images in color but it can also capture in
monochrome. Changing to monochrome can improve image quality of
captures when using a blackboard or when printing exclusively to black
and white printers.
To toggle between color and monochrome captures:
1 Locate the Enable Monochrome Capture Sheet or Enable Color
Capture Sheet.
NOTE: note:
If you cannot locate your monochrome or color target sheets, you can
download them from the PolyVision web site at: http://
www.polyvision.com.
2 Tape the monochrome or color sheet to the top center of the board,
directly under the camera arm.
3 Press a control pad button.
note: NOTE:
If you have CopyCam Pro and if you press the control pad Print button,
make sure the printer is turned on.
4 After the voice prompt says "scan done," remove the target and you
are ready to capture the board.
58
C M
OLOR OR ONOCHROME
CopyCam Operation