Copycam Pro: Installing And Testing The Printer; About The Color Printer; Installing The Printer - PolyVision CopyCam Installation And Operation Manual

C C P
OPY AM

About the Color Printer...

Each CopyCam Pro includes a color printer. The printer is shipped with a
Bluetooth wireless adapter. The CopyCam Pro camera arm is configured at
the factory to transmit a radio signal to the Bluetooth adapter that comes in
the same box.
Bluetooth technology allows the printer to receive its signal anywhere in a
30 feet (10m) radius from the camera arm. The printer can be placed in a
separate room if desired, although walls may slightly reduce the signal
range. If you need to install a replacement printer, refer to "CopyCam Pro:
Changing Printers" on page 46.

Installing the Printer

To install the printer:
1 Identify a location for the printer within 30 feet (10 m) of the CopyCam
Pro camera arm and within a few feet (one meter) of a power outlet.
2 Plug the Bluetooth adapter into the printer and plug in the adapter's
power cord.
3 Plug in the printer's power cord.
4 If it is not already on, power on the printer.
5 Add ink cartridges (provided with the printer).
6 Add paper.
26
: I
RO NSTALLING AND
T P
ESTING THE RINTER
CopyCam Installation