Copycam Pro: Changing Printers; Changing Wireless Printers - PolyVision CopyCam Installation And Operation Manual

Date/Time: The current date and time, which can be adjusted on the
"Settings" tab.
Powered On: The time of the last power on. Power on occurs when the
CopyCam power adapter is plugged into a power outlet. (Images and
settings are preserved during power outages.)
Last Capture: The time of the last use of CopyCam to save or print a copy
of the board.
Serial Number: The CopyCam serial number. The serial number is also
located on the top of the camera arm.
MAC Address: The unique ethernet hardware adapter address.
Firmware Revision: The version number of the CopyCam firmware.
C C P
OPY AM
The "Settings" tab on the web server includes provisions for changing the
printer associated with a CopyCam Pro. You can change to a different
wireless printer, or change settings so CopyCam Pro prints to a network
printer on the LAN instead of a wireless printer. Refer to "Changing to a
Network Printer" on page 49.

Changing Wireless Printers

If your CopyCam Pro is connected to a LAN and the wireless color printer
needs to be changed (such as for a warranty replacement), follow the steps
below.
To change the color printer:
1 Find your Bluetooth adapter's device address. It can be obtained by
pressing the small button on the adapter so the printer produces an
information page that contains the address. Make a note of this
number.
46
: C P
RO HANGING RINTERS
Web Configuration and Testing