PolyVision CopyCam Installation And Operation Manual page 46

1 Enter your password. The user name is always blank and the factory
default password is "admin."
2 Click "OK."
Use DHCP
Check this box if your LAN uses DHCP protocol. Remove the check mark if
your LAN uses fixed IP addressing. Consult your system administrator if
you are unsure.
IP Address
During configuration, the CopyCam web server IP address is determined
automatically by DHCP or you may assign it here manually if the "Use
DHCP" checkbox is not checked. (Refer to the CopyCam Installation Guide
for information about how to configure CopyCam the first time.)
Subnet Mask
This network reference is determined automatically by DHCP or you may
assign it manually here if the "Use DHCP" checkbox is not checked.
Gateway
CopyCam uses this gateway address only when updating firmware over
the Internet. It is determined automatically through DHCP or you may
assign it manually here if the "Use DHCP" checkbox is not checked.
Board Name
Enter a name that will help you identify the location of this CopyCam. This
name appears at the top of the web page.
Capture Type
CopyCam normally captures images in color but it can also capture in
monochrome. Changing to monochrome capture type can improve image
quality when using a blackboard or when printing exclusively to black and
white printers, such as network laser printers.
Printer Type (CopyCam Pro only)
CopyCam comes with its own color printer that uses wireless Bluetooth
technology. However you can also print to some PCL-4 compatible printers
sharing the same LAN. (Check with your dealer or PolyVision Technical
Support to determine whether your printer is compatible with CopyCam.)
Bluetooth is the default printer type. If you need to change printers, refer to
"CopyCam Pro: Changing Printers" on page 46.
42 Web Configuration and Testing